• Bodyweight hangs trigger collagen remodeling without added weight — When you hang from a bar, your body senses the stretch and responds by strengthening the tissues under tension. This process, called mechanotransduction, helps your tendons grow thicker and more resilient. You don’t need added resistance to get this benefit — just consistent practice and good form.

• The real gains come from consistency, not intensity — A daily bodyweight hang of 30 to 60 seconds signals your body to start reinforcing connective tissue. Over time, this adds up. Your shoulders become more stable, your grip gets stronger and you move with better alignment. There’s no need to go to failure or chase exhaustion. Your goal is repeatable, high-quality reps that build strength gradually.

• Once you can hang for 60 to 90 seconds, you’ll have options — If and only if you’ve built that base, begin experimenting with added weight. Start slow with a 5- or 10-pound dumbbell clipped to a dip belt or tucked in a backpack. The goal isn’t to max out — it’s to apply just enough load to deepen the tendon response, without stressing your joints.

• Weighted hangs show what’s possible, but they’re not where you begin — A 20-second hang with 100 extra pounds triggers intense collagen remodeling, but that’s not a starting point — it’s a destination. If you’re not prepared, jumping to weighted hangs risks tendon injury and nerve strain. Always master bodyweight hangs first.

• You’re training the muscles that protect your joints, not just the ones you see — Even without weights, dead hangs activate deep stabilizer muscles in your shoulders, back and spine. These are the support systems that keep your joints aligned, improve your posture and prevent chronic pain. Strong stabilizers don’t just help in workouts; they change how you move through daily life.

• A thick bar changes how the weight feels and challenges your grip more — It’s not just about the size. Because your hand is farther from the center of the bar, the mechanical leverage changes. This increases the torque, meaning your grip has to work harder to stabilize the same weight. You feel it instantly in your forearms and finger joints, even though the plate weight hasn’t changed.

• Thicker bars reduce pain, which lets you hang heavier — The surface area on a 3-inch bar is wider, which spreads out pressure across your palms. That means less skin shear, fewer hot spots and less pain. For many people, pain — not strength — is the limiting factor in dead hangs. This subtle change often makes the difference between hitting a training plateau and breaking through it.

• You shouldn’t add weight right away — Again, start with just your body weight until you can hold a hang for at least one or two minutes with good form. From there, add weight in 10 to 15-pound increments. Rushing into 100-pound hangs isn’t just unwise — it increases your risk of bruising your abdominal soft tissue, especially around the belt. Always pad the belt and listen to your body.

• A little bit each day goes a long way — You don’t have to schedule an entire workout around this. The stimulus is so compact that you can layer it into your day with minimal effort. One hard hang in the morning, another in the evening — done consistently, this alone could restructure how your connective tissues hold up under load.

• Tendons limit how strong your grip gets, unless you train them directly — Eckert pointed out that your body naturally “caps” how much tension it allows muscles to generate if the tendons they attach to are too weak. That cap protects you from injury, but it also limits how much strength you build. “Your body recognizes when you have weak tendons,” he explained, which is why developing dense, resilient tendons is key to reaching your true potential.

• Training tendons is slow, but consistent loading works — Because tendons have limited blood flow, they adapt far more slowly than muscles. That’s why building grip strength isn’t about blasting your forearms once a week. Instead, Eckert stressed the importance of doing “a little bit every day” to get long-term results. He stated, “The process takes a long time to improve your grip strength. If you want long-term quality results, you’re going to have to spend a lot of time doing it.”

• Basic dead hangs still have a place in advanced training — Eckert described dead hangs as “more of a beginner exercise,” but also acknowledged that even elite climbers and athletes return to them regularly. When his hands are fatigued or he’s looking to maintain tendon health with low strain, dead hangs become his go-to. “You can always revert back to the basics to get the most out of your workout,” he said.

• Form matters more than complexity — Instead of chasing new gadgets or advanced techniques, Eckert encouraged sticking to foundational movements with great form. He builds much of his routine around simple isometrics — static holds — because they’re easy to repeat, scale and fit into a daily schedule without wrecking your hands. His message was simple: complexity doesn’t equal effectiveness.

• You don’t need a gym to train grip — Part of Eckert’s strategy is accessibility. He showed how he built his own spring-loaded hangboard using wood, resistance bands and minimal equipment. You can mimic the same effect with a piece of wood on a pull-up bar, a gallon of water or any weighted object that challenges your grip position. The goal isn’t perfect equipment — it’s regular practice.

• These can be tailored to your strength level — No-hangs work whether you’re brand new or advanced. The amount of resistance and the ledge size are scaled to match your current capacity. He demonstrated options ranging from a 38-millimeter (mm) edge (easy) to a 15-mm edge (very hard), each with corresponding grip challenges. This helps you progress gradually and track improvements over time.

• Short sessions spread throughout the day are more effective than one big workout — Eckert explained that grip strength improves faster when you train it throughout the day rather than loading everything into a single session. “I feel a lot more benefit coming from that and the consistent effort than I do just dedicating like once a week to a grip strength workout,” he said. This matches what we know about tendon remodeling: consistent, low-volume loading wins.

• You need to train more than just squeezing — According to Eckert, grip strength isn’t just about crushing things with your whole hand. It involves all the different ways your wrist and fingers can move: pinching, pulling, flexing, twisting. “Anytime you’re moving, you’re pulling on a muscle,” he said, and to build full grip strength, you want to be training every action the hand can do.

• Movements like pronation and supination are often ignored, but essential — Two key movements Eckert demonstrated were pronation (rotating your hand palm-down) and supination (rotating palm-up). These motions use deep forearm muscles that stabilize your grip, especially under awkward or rotational loads. He showed how to train these using rubber bands or even a hammer to apply torque while your wrist fights back.

• Pinch and crimp strength are two separate skill sets — Eckert pointed out that even experienced athletes have hand asymmetries. His own weak spot was in the pointer finger and thumb, key for pinching and crimping. To fix this, he demonstrated an exercise where he grabs a 25-pound calibrated weight plate by the lip and performs micro reps, targeting his thumb and index finger with surgical precision. “This helps increase your overall hand strength and it’s an insane forearm flex,” he said.

• His strategies are built for environments where failure is not an option — Unlike athletes with the luxury of full-time recovery and carefully timed meals, soldiers must train for strength that holds up under extreme pressure. Tsatsouline says his methods are “antifragile” — they improve under stress, as effective programming must still work when nutrition, sleep and comfort fall apart.

• You can instantly lift more weight using this one trick — Tsatsouline shares a technique for amplifying your strength during any lift: white-knuckle grip tension. When a lift gets difficult, crush the bar or weight in your hand as tightly as possible. This recruits more muscle fibers through a principle called irradiation, where muscle tension in one area spills over into neighboring muscles, increasing total force output. You’ll get several more reps out, he promises.

• Add your abs and glutes for even more power — Once you’ve mastered grip tension, Tsatsouline adds two more elements: tighten your abs as if someone’s about to punch you and contract your glutes like someone’s going to kick you. Doing all three at once — grip, glutes, abs — supercharges your whole body’s output.

• Train grip and core to improve everything else — If you don’t know what to focus on, Tsatsouline advises training your grip and your core. Why? Because both areas have an outsized impact on total body strength. Your grip has dense nerve connections to your brain, and when it’s engaged, your whole body follows. Your core amplifies your strength by increasing intra-abdominal pressure, like turning up the volume on your nervous system’s signals.

• Use ‘grease the groove’ to get stronger without fatiguing yourself — For grip strength, Tsatsouline recommends using a method he calls “grease the groove,” based on Soviet Olympic training protocols. Use a load or variation that feels challenging but controlled, and perform only half the number of reps you could do at maximum effort.

Then rest and repeat the same movement later — ideally every hour or two. The key is consistency without fatigue, which builds strength over time without risking burnout or injury.

1. Start with bodyweight-only hangs for 30 to 60 seconds per set — If you’re not comfortable holding your bodyweight yet, work up to it using resistance bands or partial hangs with your feet on the ground. The goal is to load your joints, not max out your muscles.

Two sets a day — morning and evening — is enough. And always stop before failure. Maintain tension in your shoulders by pulling them down slightly and engaging your lats. This primes your nervous system and protects your rotator cuffs.

2. Use a thicker grip to activate more nerves and protect your hands — Wrap a towel or foam pad around your pull-up bar. This makes your hand spread out more and activates more muscles without needing to add extra weight. A thick grip also spreads pressure across your palm and fingers, reducing the risk of blisters or nerve compression. This aligns with Tsatsouline’s principle of irradiation — activating one area (your grip) spills tension into nearby muscles, creating full-body strength.

3. Once you can hold 60 seconds, start adding weight, but keep reps short — Clip 5 to 10 pounds to a dip belt or use a backpack. Keep the load light and the form strict: shoulders engaged, core tight, steady breath. Aim for 20- to 30-second hangs. Adding glute and abdominal contraction during the hang, just as Tsatsouline recommends — will amplify your strength and protect your spine.

4. Use “grease the groove” to train smarter, not harder — You don’t have to train to exhaustion. Grease the groove means doing frequent submaximal sets throughout the day — just enough to signal adaptation, not enough to cause fatigue. For example, if you can hold a hang for 60 seconds, do sets of 20 to 30 seconds spaced out every hour or two. Over time, your grip, shoulders and nervous system will adapt, without needing to “recover” from a workout.

5. Train every movement your hand and wrist make, not just grip — Strong hands aren’t just about squeezing hard. You need wrist control in every direction. Use resistance bands, a bucket filled with dry rice or simple tools like hammers to train your hands and wrists in all directions. These targeted movements build balanced strength, lower your risk of injury and help you move more powerfully in sports, workouts or everyday tasks.